- 608 - kbu801 thru kbu807 single phase 8.0 amps. silicon bridge rectifiers voltage range 50 to 1000 volts current 8.0 amperes features ul recognized file # e-96005 high surge current capability ideal for printed circuit board reliable low cost construction technique results in inexpensive product high temperature soldering guaranteed: 260 / 10 seconds / 0.375? ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension weight: 8 grams kbu dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol kbu 801 kbu 802 kbu 803 kbu 804 kbu 805 kbu 806 kbu 807 units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum avera g e forward rectified current @t a = 65 i (av) 8.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 300 a maximum instantaneous forward voltage @ 8.0a v f 1.1 v maximum dc reverse current @ t a =25 at rated dc blocking voltage @ t a =100 i r 10 500 ua ua typical thermal resistance (note 1) (note 2) r ja r jc 18 3.0 /w operating temperature range t j -55 to +125 storage temperature range t stg -55 to +150 note: 1. thermal resistance from junction to ambient and junction to case with units mounted on 2? x 3? x 0.25? al-plate.
- 609 - ratings and characteristic curves (kbu801 thru kbu807) fig.4- typical reverse characteristics per bridge element instantaneous reverse current .( a) 0 20 40 60 80 100 120 140 0.1 1.0 10 100 percent of rated peak reverse voltage. (%) tj=100 c 0 tj=25 c 0 fig.1- maximum non-repetitive forward surge current per bridge element peak for ward surge current . (a) 10 2 5 1 50 20 100 150 50 100 200 250 300 number of cycles at 60hz 8.3ms single half sine wave jedec method ta=25 c 0 fig.3- typical instantaneous forward characteristics per bridge element instantaneous for ward current . (a) 0.6 0.7 0.8 0.9 1.0 1.1 1.3 1.2 0.1 0.4 4.0 40 0.2 2.0 20 1.0 10 100 instantaneous forward voltage. (v) tj=25 c pulse width-300 s 1% duty cycle 0 fig.2- maximum forward current derating curve average for ward current . (a) 0 50 100 150 0 2 4 6 8 ambient temperature. ( c) o mounted on 4x4 inch copper pc board 0.5" (12.7mm) lead length
|
